EcoStruxure Building Operation: Technical Documentation - Technical Advisory

This is a notice of the release of EcoStruxure Building Operation 7.0.1 Release Candidate. This advisory provides details of special interests regarding the re-introduction of the legacy protocols NETWORK 8000 and I/NET, important information about signed firmware, as well as details about commercial availability of licenses.

After upgrading to the latest versions of Chromium based web browsers such as Google Chrome and Microsoft Edge, EcoStruxure Building Operation web-based user interface, WebStation, in all released and supported versions may no longer operate correctly when graphics are attempted to be displayed. The symptoms include, but may not be limited to, failure for graphics to show data correctly and error prompts such as “MutationEvents not defined” being shown. These steps can be taken as workarounds for Google Chrome and Microsoft Edge.

This is notice of a recent update to the EcoStruxure Building Operation 2024 release candidate. The original version posted to the EcoXpert Extranet (SpaceLogic Firmware package v6.00.01.00012) has been withdrawn due to a defect encountered during the upgrade of RP-X Controllers with connected Zigbee devices. A new release candidate (SpaceLogic Firmware package v6.00.01.02108) that resolves this issue has been published on the EcoXpert Extranet. Note that this new version also includes one other fix. See the EcoStruxure Building Operation 2024 Release Notes. Please ensure that no more installations and upgrades are done with SPL FW 6.00.01.00012 as it is now replaced.

Schneider Electric is providing notice of a recent update to the EcoStruxure Building Operation 2024 release candidate. The original version posted to the EcoXpert Extranet (EBO 2024 v6.0.1.91) has been withdrawn due to a defect encountered during the upgrade or import affecting some Modbus data points. A new release candidate (EBO 2024 v6.0.1.93) that resolves this issue has been published on the EcoXpert Extranet. Please ensure to remove any installations and downloads of EBO v6.0.1.91 as it will not be supported.

Schneider Electric is providing notice of some significant improvements in the software license ordering flow. These improvements are effective as of November 2022 and apply to orders of all software licenses related to EcoStruxure Building Operation. This also applies to existing orders which were made prior to November 2022.

TPA-EBO-20-0009.00 In EBO v2.0.x & v3.0.2 when utilizing an Enterprise Central (EC), the BACnet default command priority setting value of the EC is imposed upon all child Enterprise Servers (ES) in the system. Any BACnet default command priority setting value in any of the child ESs that differs from the setting value in the EC will be overridden. This could impact system functionality. Read more in this TPA.

TPA-EBO-19-0006.00 Project Configuration Tool v1.2.7.223 for EcoStruxure™ Building Operation, available for download effective immediately.

Schneider Electric has received reports of some Living Space Sensors emitting a “high pitched” sound that is audible only to some people. The reported noise was investigated by our R&D team and the source of the undesirable noise was determined to be capacitors in the switching power supply circuit.

TPA-EBO-19-0003.00 SmartX IP Controller - Noise Reports

TPA-EBO-19-0002.00 SmartX Advanced Display Android 8 Compatibility

Workaround solution for SmartX IP Controller MP Series (MP-C & MP-V) serial numbers. TPA-EBO-18-0005.00

EcoStruxure Building Operation 2.0.1.135

TPA-EBO-18-0004.00 SmartX IP Controller - MP Series Firmware Revision 1.00.01.00131.

License Server not running correctly on some localized operating systems

SmartX Advanced Display AD-Link not able to connect on Android 7

This Technical Product Advisory is being updated to direct you to detailed instructions on installation of this software depending on your job situation. (This TPA replaces TPA-SBO-15-0002.02)

TPA-SBO-14-0004.01 replaces TPA-SBO-14- 0004.00 The hotfix installer 1.5.0.3001 has been replaced by build 1.5.0.3003 Hotfix for StruxureWare Building Operation WorkStation v1.5

TPA-SBO-14-0002.01 replaces TPA-SBO-14-0002.00 Hotfix for this issue have been created Known issues editing TAC Xenta time schedules from StruxureWare Building Operation Workstation

TPA-SBO-14-0001.00 Automation Server to BACnet MS/TP & Modbus RS485 Network – Application Notes A collection of application notes and Quick Start Best Practices Guides are available on the subject of BACnet MS/TP and Modbus RS485 network connections to the StruxureWare Automation Server.

We have made a consolidated hotfix for StruxureWare™ for Buildings v1.0 which incorporates all previous hotfixes. This hotfix supersedes all prior hotfixes.